Cheryl A. Snyder
Phone:  610-346-7908Office:  215-538-4400
Email:  csnyder@remax440.comCell:  215-801-0583Fax:  267-354-6905
Cheryl A. Snyder
Cheryl A. Snyder
< Back to Cheryl's Blog

Homebuyers: Identifying Costly Repairs

March 12, 2015 1:54 am

(BPT) - When you're about to buy a house, it's easy to get excited about its great location, spacious floor plan or beautifully decorated interior. Before signing on the dotted line, use this checklist to help avoid some potentially costly surprises and anticipate repairs or upgrades that may be needed.

Roof
- Ask when the current roof was installed. Is it the original roof, or has it been replaced, repaired, or covered over with new shingles in certain spots? Are there known leaks, and if so, where are they? Have any of the leaks caused damage to the attic or interior? Also look at the chimney to see if it's properly sealed around the edges and whether the gutters need repair.

Windows and Doors
– Next, take a look at the windows to see if there is any condensation between the glass panes. If so, it could mean window replacements are in order. Once you get inside the house and close the front door, see if any light is coming through between the edge of the door opening and the wall. This gap is an indicator that the door may need to be replaced since air can escape through it and cause higher energy bills.

Lighting and Electrical
– Throughout the interior rooms, many homes are staged to appeal to buyers with attractive lighting that shows off the space to its best advantage. You may love the way the lamps look in the bedroom, office or kitchen, but more importantly, check out how many electrical outlets there are and whether they are in convenient locations. Also, make sure you check to see if the lamps are masking the fact that there are no ceiling fixtures in each room. Will you need to rig up extension cords or invest in electrical work in order to support all the lamps, ceiling fixtures, appliances and electronics you wish to use?

Furnace
– At the basement level, be sure to check out the heating system. If the current furnace is more than 10 years old, it may be operating at a much lower level of efficiency than the latest manufacturing standards require, resulting in higher energy costs. Newer models can operate at nearly 20 percent higher efficiency than the government minimum standard, for the ultimate in energy efficiency.

Published with permission from RISMedia.

Add a comment